ASSAP logo Static electricity and the paranormal
Bookmark and Share

Static fields
The electric field lines between a statically charged electrical conductor (O) and an earthed conductor (G), such as a central heating radiator.

Vigil equipment pages
Vigil equipment
Instrument baselines
Investigation techniques
Witnesses versus instruments
Paranormal equipment failures
EMF meters - what they do
What EMF meters measure
EMF meters - cause of readings
Analysing vigil data
Sound and radiation detectors
Negative ion detectors
Using still cameras on vigils
Static electricity and paranormal
Data loggers on vigils
Humidity and lighting
EVP infrasound IR thermometer

Measuring static electricity

To measure static electric fields you need an electric field meter (also called a static meter or static locator). These tend to be on the expensive side, compared to EMF meters.

Electric fields have direction, like magnetic fields (see diagram above). Thus, readings can vary according to which way the meter is pointing. Also, if a statically charged surface rotates it will cause field strength changes nearby. What is more, the meter itself may affect the field, especially if it is earthed.

One meter, popular among ghost researchers, measures small changes in static electric fields. Unfortunately, it does not give the overall electric field so there is no way to know if it is unusual. Even more important, it does not say whether the field has gone up or down. It is very sensitive to small changes in the field, caused by people walking around, for instance. In some cases it is possible to detect someone walking in another room! For lots of technical info on static electricity see Mr Static!
© Maurice Townsend 2007

   

Causes of static electricity

The most common source of static electricity is an exchange of electrons between object surfaces. Bringing two surfaces into close contact and then separating them causes some electrons to move from one object to the other due to molecular attraction. The effect works better if the surfaces are rubbed together (triboelectrification). Many surfaces, particularly if they are electrically insulated, can easily produce static electricity.

Where is it found?

The short answer is that static electricity is found virtually everywhere, almost all the time (as anyone who deals with electronics at board level will know) but usually not at a level to be noticed without sensitive instruments.

Static builds up much less when the relative humidity exceeds about 60%. This is because moisture forms a layer on objects effectively neutralizing any charge there.

Causes of readings

Electric field meters will show charge changes due to charge accumulation (mostly triboelectrification), reduction (eg. through electrical conduction and air ions) and charged objects physically moving around. This means that charge will change a lot where there is object movement and even, to a lesser extent, when everything is stationary.

This last point is important to note because if you get a change in static field on a vigil when everything is motionless, it doesn't necessarily imply paranormal activity.

Using static electricity as an indicator for paranormal activity will always be problematic. It is too easy to produce static electricity unintentionally and predicting natural changes in the field is difficult.